LMT DISPLAY / ENGINEERING RESOURCES
Adapt the module.
Keep the constraints visible.
Customization is reviewed against the selected panel, enclosure and host. Feasibility, tooling, quantity and validation are confirmed before a custom order.
What can be customized
- FPC length, exit direction and pin assignment, subject to mechanical and electrical review.
- Backlight and brightness target, subject to power and thermal evaluation.
- Touch bonding and cover glass, subject to the optical stack and touch-controller tuning.
- Adapter-board configuration, subject to the native interface and timing.
What cannot be changed by a module modification
The selected panel’s native resolution and glass dimensions are fixed. A different resolution or active area generally requires a different panel, not a rewritten initialization sequence. A 40-pin connector does not make unrelated modules pin-compatible.
Process
- Send the enclosure drawing, host interface and target quantity.
- Confirm the parameter changes and the drawing revision.
- Approve tooling and sample terms before fabrication.
- Validate the sample in the final host and mechanical assembly.
- Release production against the approved specification and change record.
Minimum and lead time
| Item | Confirmed value |
|---|---|
| Custom FPC MOQ | — |
| Custom touch or cover-glass MOQ | — |
| Custom backlight MOQ | — |
| Custom sample lead time | — |
| Custom production lead time | — |
These custom-order values are not established by the supplied module specifications. They will be written into the project quotation rather than copied from standard-module sample terms.
NEXT STEP
Start with your specification.
Send the size, resolution, host interface and quantity. We will reply within 48 hours with parameter questions and an RFQ response.